home *** CD-ROM | disk | FTP | other *** search
/ PsL Monthly 1994 September / PSL Monthly Shareware CD-ROM (September 1994).ISO / psl_news / manual.doc < prev    next >
Text File  |  1994-07-20  |  9KB  |  97 lines

  1. This file -- MANUAL.DOC -- (c) Copyright 1994 by SoftCraft, Inc., All rights reserved
  2.  
  3. ---------------------- DOCUMENTATION -----------------------------------------
  4. The calls to the library for the basic menu operation is well documented in the example programs.  Look at DOSMENU.C for the graphical interface menu and TEXTEXAM.C for the text mode example.
  5.  
  6. The shareware libraries are intended to be used with the Microsoft "C" or Visual "C++" compilers. They are compiled using the "LARGE" memory model. Your programs must use the large or huge model also.  No other compilers are supported at this time.
  7.  
  8. The examples and libraries will require *.FON files.  The supplied font file is required for the DOSEXAM.EXE example.
  9.  
  10. You must register to use the library in a program being distributed to others or for commercial programs.  See REGISTER.DOC for more information.
  11.  
  12. --------------------  TECHNICAL SUPPORT  -------------------------------------
  13. PRODUCT UPDATES: Because SoftCraft, Inc. strives to provide the best products possible, we periodically enhance our products. SoftCraft, Inc. will notify you only through our update channels when product upgrades or new products become available and how you can obtain them.
  14.  
  15. PRODUCT SUPPORT: You should rely on the manual or supporting documentation. If you do encounter a technical problem with the program, not addressed in the manual, our Product Support Team will be glad to help you.
  16.  
  17. Before you call or write, be sure to read the section of the manual that describes the procedure you are trying to perform. If you still are not able to resolve the problem, give us a call at the number listed. We want to make sure you are making the most effective use of the program. But, BEFORE YOU CALL, we ask that you be in front of your computer and have the following information available:
  18.  
  19.     1) Version and Serial Number (from diskette label or opening screen)
  20.     2) Computer make and model
  21.     3) Amount of memory (RAM)
  22.     4) Version of DOS (Disk Operating System)
  23.     5) Printer model (parallel or serial)
  24.     6) Type of Graphics Card
  25.     7) Type of monitor (EGA or VGA)
  26.     8) List of error messages (if any)
  27.     9) List other types of hardware used with your computer
  28.        (i.e., external hard disk, memory expansion boards, etc.)
  29.    10) Compiler type and version number
  30.   
  31. CUSTOMER SUPPORT: To participate in SoftCraft, Inc.'s support services, you must register the program. Once you receive the registered program, fill in the warranty card and return it to us. This opens the lines of communication and enables us to keep you informed of updates and changes to the program.
  32.  
  33. WHERE TO CALL FOR SUPPORT: If you live in the US., you may call 708-360-0073 from 9:00-12:00 noon or 1:00-4:00pm Central Time, Monday through Friday. We also have data and FAX capabilities online 24 hrs, 7 days a week at 708-360-0081.
  34.  
  35. You can also E-mail your problem to our president, Richard Andrew, at his CompuServe address 76070,650.
  36.  
  37. If you live outside the US., and your dealer or distributor cannot solve the problem, send a letter to us describing the problem and the hardware you're using.
  38.  
  39. SoftCraft, Inc.'s Product Support Team is trained to help you only with products produced by SoftCraft, Inc. We cannot assist you with hardware or software products that our software doesn't support. But, we do periodically enhance our products and would appreciate receiving your requests for new features. Input from our customers helps us a great deal in developing new products. Your ideas help us effectively support and improve our products for you. Inquires for private label products or customization should be directed to the addresses given above.
  40.  
  41. -------------------- SOFTCRAFT, INC. SOFTWARE LICENSE ------------------------
  42. This is a legal agreement between you, the end user, and SoftCraft, Inc. 
  43.  
  44. GRANT OF LICENSE: SoftCraft, Inc. grants to you the right to use one copy of the enclosed SoftCraft, Inc. software program (the "SOFTWARE") on a single terminal connected to a single computer (i.e., with a single CPU). You may not network the SOFTWARE or otherwise use it on more than one computer or computer terminal at the same time.
  45.  
  46. COPYRIGHT: The SOFTWARE is owned by SoftCraft, Inc. and is protected by United States copyright laws and international treaty provisions. Therefore, you must treat the SOFTWARE like any other copyrighted material (e.g., a book or musical recording).
  47.  
  48. DISTRIBUTION: The shareware version of the SOFTWARE may be distributed freely as long as the following rules are adhered to:
  49.          1) No change is made to the archive of files. Absolutely
  50.             no changes may be made to any copyright or trademark
  51.             notices.
  52.          2) No charge is made for the program itself. You may
  53.             charge a copying fee (or distribution charge).
  54.          3) No claim is made that anyone other than SoftCraft, Inc.
  55.             owns the program. PatternMaster Lite is a trademark of
  56.             SoftCraft, Inc.
  57.          4) Inclusion in LCR racks or CD-ROM distribution requires
  58.             the express written permission of SoftCraft, Inc.
  59.          5) Vendors who wish to distribute the SOFTWARE and inform
  60.             us in writing will be keep abreast of any changes. Our
  61.             only request is that you forward copies of any catalog
  62.             listings and press releases that list the SOFTWARE by
  63.             name.
  64.  
  65. OTHER RESTRICTIONS: You may not rent or lease the SOFTWARE. You may not reverse engineer, decompile or disassemble the SOFTWARE.
  66.  
  67. The SOFTWARE is provided for your personal use only. The SOFTWARE may not be used in the normal course of business without the express written permission of SoftCraft, Inc. 
  68.  
  69. ----------------------- LIMITED WARRANTY -------------------------------------
  70. LIMITED WARRANTY: SoftCraft, Inc. makes no warrants what so ever for the shareware version of PatternMaster Lite. 
  71.  
  72. SoftCraft, Inc. warrants that the registered version of (a) the SOFTWARE will perform substantially in accordance with the accompanying written materials for a period of 90 days from the date of receipt; and (b) any hardware accompanying the SOFTWARE will be free from defects in materials and workmanship under normal use and service for a period of one year from the date of receipt.  Any implied warranties on the SOFTWARE and hardware are    limited to 90 days and one (1) year, respectively. Some states do not allow limitations on duration of an implied warranty, so the above limitation may not apply to you.
  73.  
  74. CUSTOMER REMEDIES: SoftCraft, Inc.'s entire liability and your exclusive remedy shall be, at SoftCraft, Inc.'s option, either (a) return of the price paid or (b) repair or replacement of the SOFTWARE or hardware that does not meet SoftCraft, Inc.'s Limited Warranty and which is returned to SoftCraft, Inc. with a copy of your receipt. This Limited Warranty is void if failure of the SOFTWARE or hardware has resulted from accident, abuse, misapplication, or use by a party not otherwise licensed by the licensing agreement herein. Any replacement SOFTWARE will be warranted for the remainder of the original warranty period or 30 days, whichever is longer.
  75.  
  76. NO OTHER WARRANTIES: SoftCraft, Inc. disclaims all other warranties, either express or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose, with respect to the SOFTWARE, the accompanying written materials, and any accompanying hardware,  This limited warranty gives you specific legal rights. You may have others, which vary from state to state.
  77.  
  78. NO LIABILITY FOR CONSEQUENTIAL DAMAGES: In no event shall SoftCraft, Inc. or its suppliers be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arising out of the use of   or inability to use this SoftCraft, Inc. product, even if SoftCraft, Inc. has been advised of the possibility of such damages. Because some states do not allow the exclusion or limitation of liability fo